Regulatory Updates

CHDC 13 (4991) DTZS, Solvent-based primer for coil coatings – Specification, First edition 

Product Image

Distribution date: 18 November 2026 | Final date for Comment: 17 January 2027

This Standard specifies the classification, requirements, sampling, test methods, packaging, labelling and storage of solvent-based primers for coil coatings

Products Covered: Paints and varnishes, incl. enamels and lacquers, based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions of products of headings 3901 to 3913 in volatile organic solvents, containing > 50% solvent by weight (excl. solutions of collodion) (HS code(s): 3208); Paints and varnishes (ICS code(s): 87.040)

Regulation Type: Regular notification

CHDC 13 (4990) DTZS, Solvent - based paint for coil coatings – Specification, First edition 

Product Image

Distribution date: 18 November 2026 | Final date for Comment: 17 January 2027

This Standard specifies requirements, sampling and test methods for solvent-based back coats bottom coats)and topcoats used in metal sheets

Products Covered: Paints and varnishes, incl. enamels and lacquers, based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions of products of headings 3901 to 3913 in volatile organic solvents, containing > 50% solvent by weight (excl. solutions of collodion) (HS code(s): 3208); Paints and varnishes (ICS code(s): 87.040)

Regulation Type: Regular notification

CHDC 14 (4586) DTZS, Reclaimed rubber - Specification, First edition 

Product Image

Distribution date: 18 November 2026 | Final date for Comment: 17 January 2027

This draft standard specifies requirements, sampling and test method for seven different classes of reclaimed rubber.

Products Covered: Reclaimed rubber in primary forms or in plates, sheets or strip. (HS code(s): 4003); Raw materials for rubber and plastics in general (ICS code(s): 83.040.01)

Regulation Type: Regular notification

CHDC 13 (4995) DTZS, Bright Acid-Catalysed Interior Furniture Lacquer - specification, First edition 

Product Image

Distribution date: 18 November 2026 | Final date for Comment: 17 January 2027

This Standard specifies requirements, sampling, packaging, labelling and test methods for clear or tinted, fast-drying, two-component acid-catalysed lacquer intended for finishing interior furniture and other wooden surfaces.

Products Covered: Paints and varnishes, incl. enamels and lacquers, based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions of products of headings 3901 to 3913 in volatile organic solvents, containing > 50% solvent by weight (excl. solutions of collodion) (HS code(s): 3208); Fruits and derived products (ICS code(s): 67.080.10)

Regulation Type: Regular notification

DUS ISO 22241-1, Diesel engines — NOx reduction agent AUS 32 — Part 1: Quality requirements, First Edition

Product Image

Distribution date: 16 November 2026 | Final date for Comment: 15 January 2027

This an adoption of ISO 22241-1:2019, Diesel engines — NOx reduction agent AUS 32 — Part 1: Quality requirements, Second Edition, with the following modifications:In Clause 2, ISO ISO 12185, Crude petroleum, petroleum products and related products — Determination of density — Laboratory density meter with an oscillating U-tube sensor has been introduced as the applicable test method for the determination of the density of AUS 32.In Clause 5, Additional requirements relating to the physical characteristics of AUS 32 and the control of input materials have been introduced as follows:General RequirementsAUS 32 shall be a clear,colourless liquid, free from visiblesuspended particles.Specific RequirementsAUS 32 shall complywith the densitylimits specified in Table 2 when testedin accordance with the test methods specified therein.PropertyLimits Test methodsmin.max.Density at 20°C, kg/m31,0871,093ISO 12185Control of input materialsManufacturers of AUS 32 shall provide documented evidence demonstrating that the technically pure urea used in its production is sourced from a recognized manufacturer or supplier and is accompanied by a Safety Data Sheet (SDS) and a Certificate of Conformity (CoC) to verify its quality and conformity with the relevant requirements.In Clause 7, the following additional labelling requirements were introduced:The following information shall be legibly and indelibly marked on the labels affixed to the containers carrying the product:a) name of the product as "AUS 32 ISO 22241-1" or "DEF ISO 22241-1";b) name and physical address of the manufacturer or distributor, or registered trademark, if any;c) net quantity, in litres;d) batch/lot identification number;e) storage instructions, including "Store at a temperature below 30 °C"; and "Protect from direct sunlight";f) manufacture and expiry date; andg) instructions for use.

Products Covered: Urea, whether or not in aqueous solution (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) (HS code(s): 310210); Fuel systems (ICS code(s): 43.060.40); AUS 32,  aqueous urea solution

Regulation Type: Regular notification

DMS 1082:2026 Hair care products – General requirements

Product Image

Distribution date: 12 November 2026 | Final date for Comment: 11 January 2027

This Draft Malawi Standard specifies the requirements for the labelling of all hair care products. It also specifies the safety and efficacy of these products. 

Products Covered: ESSENTIAL OILS AND RESINOIDS; PERFUMERY, COSMETIC OR TOILET PREPARATIONS (HS code(s): 33); Cosmetics. Toiletries (ICS code(s): 71.100.70)

Regulation Type: Regular notification

DMS 2503:2026 Chemical hair relaxers and hair waving products – Specification

Product Image

Distribution date: 12 November 2026 | Final date for Comment: 11 January 2027

This Draft Malawi Standard specifies the requirements, sampling and methods of test for chemical hair relaxers and hair waving products.This Draft Malawi Standard applies to chemical hair relaxers based on alkalis or thioglycollates, as well as hair waving (curling) products based on thioglycollates. 

Products Covered: ESSENTIAL OILS AND RESINOIDS; PERFUMERY, COSMETIC OR TOILET PREPARATIONS (HS code(s): 33); Cosmetics. Toiletries (ICS code(s): 71.100.70)

Regulation Type: Regular notification

DMS 2507:2026 Henna powder – Specification

Product Image

Distribution date: 12 November 2026 | Final date for Comment: 11 January 2027

This Draft Malawi Standard specifies the requirements, sampling and test methods for pure henna powder. 

Products Covered: ESSENTIAL OILS AND RESINOIDS; PERFUMERY, COSMETIC OR TOILET PREPARATIONS (HS code(s): 33); Cosmetics. Toiletries (ICS code(s): 71.100.70)

Regulation Type: Regular notification

DMS 2519:2026 Bath oil – Specification

Product Image

Distribution date: 12 November 2026 | Final date for Comment: 11 January 2027

This Draft Malawi Standard specifies requirements, sampling and test methods for bath oil based on refined vegetable oils or vegetable oils blends, mineral oils or mixture of the vegetable oils and mineral oils, for application on the skin or added to bath water.

Products Covered: ESSENTIAL OILS AND RESINOIDS; PERFUMERY, COSMETIC OR TOILET PREPARATIONS (HS code(s): 33); Cosmetics. Toiletries (ICS code(s): 71.100.70)

Regulation Type: Regular notification

DMS 2517:2026 Hair spray – Specification

Product Image

Distribution date: 12 November 2026 | Final date for Comment: 11 January 2027

This Draft Malawi Standard specifies the requirements, sampling and test methods for hair spray. This standard is applicable to both water based and oil based hair sprays delivered by the aerosol or non-aerosol system.

Products Covered: ESSENTIAL OILS AND RESINOIDS; PERFUMERY, COSMETIC OR TOILET PREPARATIONS (HS code(s): 33); Cosmetics. Toiletries (ICS code(s): 71.100.70)

Regulation Type: Regular notification

Submit your email ID to receive notifications about upcoming courses and events

Get Regulatory & Sustainability Updates on WhatsApp