Regulatory Updates
AFDC 7 (4025) DTZS, Essential oil of cardamom - Specification, First edition
Distribution date: 13 March 2026 | Final date for Comment: 12 May 2026
This Tanzania Standard specifies the requirements, methods of sampling and test for essential oil of cardamom intended for human consumption Note: This Draft Tanzania Standard was also notified under SPS committee.
Products Covered: - Essential oils other than those of citrus fruit: (HS code(s): 33012); Essential oils (ICS code(s): 71.100.60)
Regulation Type: Regular notification
Order Amending Schedule VI to the Controlled Drugs and Substances Act (Additional Fentanyl Precursors) (17 pages in English, 21 pages in French)Regulations Amending the Precursor Control Regulations (Additional Fentanyl Precursors) (2 pages in English and French)
Distribution date: 13 March 2026
The purpose of this notification is to inform members that on March 11, 2026, Canada published permanent controls for phenethyl bromide, phenethyl chloride, phenethyl iodide, propionic anhydride, and benzyl chloride by adding them to Schedule VI of the Controlled Drugs and Substances Act and to the Schedule to the Precursor Control Regulations. The permanent controls come into force on April 12, 2026 (phenethyl bromide, propionic anhydride, and benzyl chloride are already temporarily controlled in Canada under a Ministerial Order). With these amendments, any person not authorized to conduct regulated activities with the five precursors will be subject to offences and penalties.
Products Covered: Phenethyl bromide (HS code: 290399)Phenethyl chloride (HS code: 290399)Phenethyl iodide (HS code: 290399)Propionic anhydride (HS code: 291590)Benzyl chloride (HS code: 290399)
Regulation Type: Regular notification
Arrêté 003896 rendant d'application obligatoire la norme NS 01-047 Batteries d'accumulateurs de démarrage au plomb
Distribution date: 12 March 2026 | Final date for Comment: 12 March 2026
The notified Order establishes the procedures for compliance control of lead-acid starter batteries in Senegal.The placing on the market of starter batteries that are manufactured locally or imported requires prior authorization from the Directorate of Internal Trade.
Products Covered: Accumulateurs au plomb, pour le démarrage des moteurs à piston (sauf hors d'usage) (Code(s) du SH : 850710); (Code(s) de l'ICS : 29.220.20)
Regulation Type: Regular notification
CDC10(4304)DTZS, Paper adhesive, liquid gum and office paste Specifications, Second Edition
Distribution date: 06 March 2026 | Final date for Comment: 05 May 2026
This Tanzania Standard prescribes the requirements, test methods and sampling for adhesives for joining paper to paper or paper to other surfaces like paperboard, wood, cloth, glass and metal in general office use.This standard does not cover adhesives used for making cartons and quick-setting adhesive used for labelling with high speed machinery
Products Covered: Prepared glues and other prepared adhesives, n.e.s.; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, and weighing net <= 1 kg (HS code(s): 3506); Adhesives (ICS code(s): 83.180)
Regulation Type: Regular notification
CDC10 (4315) DTZS, Folders and files — Specification, Fourth Edition
Distribution date: 06 March 2026 | Final date for Comment: 05 May 2026
This Draft Tanzania Standard specifies the requirements, sampling and test methods of the folders and files
Products Covered: Binders (other than book covers), folders and file covers, of paper or paperboard (HS code(s): 482030); Documents in administration, commerce and industry (ICS code(s): 01.140.30)
Regulation Type: Regular notification
Designation of Shitei Yakubutsu (designated substances), based on the Act on Securing Quality, Efficacy and Safety of Products Including Pharmaceuticals and Medical Devices (hereinafter referred to as the Act). (1960, Law No.145)
Distribution date: 04 March 2026
Proposal for the additional designation of 4 substances as Shitei Yakubutsu, and their proper uses under the Act.
Products Covered: Substances with probable effects on the central nervous system
Regulation Type: Regular notification
Technical regulation for Paper and board
Distribution date: 02 March 2026
Attached is a copy of the Regulation after alignment, along with the List of standards.
Products Covered: 3703, 3704, 4801, 4802, 4803, 4804, 4805, 4806, 4807, 4808, 4809, 4810, 4811, 4812, 4817, 4818, 4819, 4820, 4821, 4822, 4823
Regulation Type: Addendum to Regular Notification
Draft Decree on the Management of Cosmetics
Distribution date: 02 March 2026 | Final date for Comment: 01 May 2026
Description of content: 1. This draft Decree regulates the management of cosmetics, including:a) Declaration of cosmetic products;b) Manufacture of cosmetics in Vietnam;c) Management of imported cosmetic products and issuance of Certificates of Free Sale for exported cosmetic products;d) Product information dossiers, labeling and advertising of cosmetics;e) Online dossiers, procedures, and record keeping;f) Inspection, monitoring and ensuring the safety and quality of cosmetic products;g) Recall of cosmetic products, revocation of the registration number of the cosmetic product declaration form, and cessation of receiving applications for cosmetic product declarations.2. This draft Decree applies to domestic and foreign agencies, organizations, and individuals involved in activities related to cosmetic products in Vietnam.The Draft Decree consists of 10 Chapters and 52 Articles, specifically:1. Chapter I – General Provisions (02 Articles)Provides for the scope of regulation, subjects of application and interpretation of terms.2. Chapter II – Cosmetic Product Notification (12 Articles), provides for:- Requirements on the safety and quality of cosmetic products;- Cosmetic products must be notified to the competent state management authority before being placed on the market;- Dossiers and procedures for product notification, post-notification amendments, and applications for renewal of notification validity;- Following notification and public disclosure of product information, the competent state authority shall conduct post-notification dossier review and carry out inspection and supervision of cosmetic products circulated on the Vietnamese market.3. Chapter III – Manufacture of Cosmetics in Viet Nam (07 Articles), provides for:- Cosmetic manufacturing establishments must satisfy requirements relating to personnel, facilities, equipment and quality management systems, and shall be subject to periodic assessment every three (03) years or extraordinary inspection;- Establishes unified conditions for the issuance of the Certificate of Eligibility for Cosmetic Manufacture and the CGMP Certificate;- Decentralization to Provincial People’s Committees the authority to issue, amend and revoke the Certificate of Eligibility for Cosmetic Manufacture and the CGMP Certificate;- Provides specific cases for revocation of the Certificate of Eligibility for Cosmetic Manufacture.4. Chapter IV – Management of Imported Cosmetics and Issuance of Certificates of Free Sale (CFS) for Exported Cosmetics (03 Articles), provides for:- Imported cosmetic products must be notified prior to customs clearance, except in cases such as importation for research or testing purposes, importation by diplomatic missions, personal gifts not intended for commercial purposes, etc.;- Provisions on the issuance of Certificates of Free Sale (CFS) for domestically manufactured cosmetic products intended for export.5. Chapter V – Product Information File (PIF), Advertising and Labelling of Cosmetics (03 Articles), provides for:- Cosmetic products placed on the market must have a Product Information File (PIF) in accordance with ASEAN guidelines;- Labelling of cosmetic products shall comply with the legislation on goods labelling, and mandatory labelling requirements shall be implemented in accordance with the ASEAN Cosmetic Agreement;- Cosmetic advertising shall comply with the law on advertising and shall not require prior content approval.6. Chapter VI – Online Dossiers, Procedures and Electronic Record Retention (03 Articles)Provides for requirements applicable to online dossiers; provisions on online procedures; and electronic record retention.7. Chapter VII – Inspection, Supervision and Assurance of Cosmetic Safety and Quality (04 Articles), provides for:- Detailed provisions on post-notification dossier review;- Detailed provisions on specialized inspection. Cosmetic products that have undergone compliant post-notification dossier review shall not be subject to re-inspection;- Risk-based prioritization for quality inspection according to the level of risk posed by cosmetic products;- Specification of competent authorities designated to conduct sampling and testing of cosmetic products for quality control.8. Chapter VIII – Recall of Cosmetic Products, Revocation of Notification Receipt Numbers and Suspension of Acceptance of Notification Dossiers (04 Articles), provides for:- Cases of recall of cosmetic products; cases of revocation of notification receipt numbers and suspension of acceptance of notification dossiers;- Forms, competence and responsibilities relating to the recall of cosmetic products.9. Chapter IX – Organization of Implementation (09 Articles)Provides for the responsibilities of ministries, sectors, organizations and individuals engaged in the manufacture and trading of cosmetic products.10. Chapter X – Implementation Provisions (05 Articles)Provides for transitional provisions, entry into force, reference clauses and responsibilities for implementation.
Products Covered: Cosmetics
Regulation Type: Regular notification
Technical Regulation of paints and Varnish
Distribution date: 02 March 2026
Attached is a copy of the Regulation after alignment, along with the List of standards.
Products Covered: HS codes: 32030019, 32041600, 32041700, 32041900, 32062000, 32064900, 32071000, 32073000, 32081090, 32082090, 32089090, 32091090, 32099090, 32100010, 32100020, 32100090, 32129010, 35069900
Regulation Type: Addendum to Regular Notification
Technical Regulation of Fire Fighting Systems and Devices
Distribution date: 02 March 2026
Attached is a copy of the Regulation after alignment, along with the List of standards.
Products Covered: 3813; 4009; 7308; 7325; 8413; 8481; 8531.
Regulation Type: Addendum to Regular Notification
Submit your email ID to receive notifications about upcoming courses and events