Distribution date: 24 April 2013 | Final date for Comment: 23 June 2013

This draft of decree states that all aluminium sulphate in packaging and/or bulk within the country or imported, distributed and marketed in the country shall fulfil the SNI requirements. The producers which produced these products therefore shall comply with the requirements of SNI proven by having Product Certificate for Using SNI Mark and put SNI mark and date, month and year of production on every product. ; The product certificate on SNI marking shall be issued by a Product Certification Body which has been accredited by KAN and appointed by the Minister of Industry through: ; 1. Testing of the conformity of the products quality against SNI requirements; and ; 2. Audit on the implementation of the Quality Management System (QMS) SNI ISO 9001:2008 or its revision. ; Directorate General of Manufacturing Industry Basis, Ministry of Industry is the institution that is responsible for the implementation of this decree and shall provide a technical guidance of the decree, which cover procedure of Product Certification and SNI Marking. ; Products which are distributed in domestic market that originated domestically and imported shall meet the requirements consisted in SNI 0032:2011, which specify definition, quality requirements and testing method. ;

Products Covered: HS. Ex 2833.22.10.00

Regulation Type: Regular notification

Distribution date: 24 April 2013 | Final date for Comment: 23 June 2013

This draft of decree states that all zinc oxide in packaging and/or bulk within the country or imported, distributed and marketed in the country shall fulfil the SNI requirements. The producers which produced these products therefore shall comply with the requirements of SNI proven by having Product Certificate for Using SNI Mark and put SNI mark and date, month and year of production on every product. ; The product certificate on SNI marking shall be issued by a Product Certification Body which has been accredited by KAN and appointed by the Minister of Industry through: ; 1.Testing of the conformity of the products quality against SNI requirements; and ; 2.Audit on the implementation of the Quality Management System (QMS) SNI ISO 9001:2008 or its revision. ; Directorate General of Manufacturing Industry Basis, Ministry of Industry is the institution that is responsible for the implementation of this decree and shall provide a technical guidance of the decree, which cover procedure of Product Certification and SNI Marking. ; Products which are distributed in domestic market that originated domestically and imported shall meet the requirements consisted in SNI 0085:2009, which specify definition, quality requirements and testing method. ;

Products Covered: HS. 2817.00.10.00

Regulation Type: Regular notification

Distribution date: 24 April 2013 | Final date for Comment: 23 June 2013

This draft of decree states that all zinc oxide in packaging and/or bulk within the country or imported, distributed and marketed in the country shall fulfil the SNI requirements. The producers which produced these products therefore shall comply with the requirements of SNI proven by having Product Certificate for Using SNI Mark and put SNI mark and date, month and year of production on every product. ; The product certificate on SNI marking shall be issued by a Product Certification Body which has been accredited by KAN and appointed by the Minister of Industry through: ; 1.Testing of the conformity of the products quality against SNI requirements; and ; 2.Audit on the implementation of the Quality Management System (QMS) SNI ISO 9001:2008 or its revision. ; Directorate General of Manufacturing Industry Basis, Ministry of Industry is the institution that is responsible for the implementation of this decree and shall provide a technical guidance of the decree, which cover procedure of Product Certification and SNI Marking. ; Products which are distributed in domestic market that originated domestically and imported shall meet the requirements consisted in SNI 0085:2009, which specify definition, quality requirements and testing method. ;

Products Covered: HS. 2817.00.10.00

Regulation Type: Regular notification

Distribution date: 03 May 2013 | Final date for Comment: 12 May 2025

Products Covered: Non-medicated eyewashes (ICS Codes: 11.120)

Regulation Type: Corrigendum to Regular Notification

Distribution date: 03 May 2013 | Final date for Comment: 12 May 2025

Products Covered: Non-medicated eyewashes (ICS Codes: 11.120)

Regulation Type: Corrigendum to Regular Notification

Distribution date: 03 May 2013 | Final date for Comment: 02 July 2013

Revision of the Mandatory Standard SI 4004 part 1. This draft standard revision adopts the European Standard EN 12004: 2007 and A1: June 2012. The major differences between the old version and this new revised draft standard are as follows: ; ƒ{ Deletes the reference to 'thin layer' in paragraph 3.1.1; ; ƒ{ Deletes from paragraph 6, dealing with classification and designation, category S0 for non-deformable adhesive and accordingly deletes from Table 1 the requirement for transverse deformation of non-deformable adhesive; ; ƒ{ Adds other types and designations allowed for tile adhesives ;

Products Covered: Adhesives for tiles (HS: 3506; ICS: 83.180 and 91.100.10).

Regulation Type: Regular notification

Distribution date: 03 May 2013 | Final date for Comment: 02 July 2013

Revision of the Mandatory Standard SI 4004 part 1. This draft standard revision adopts the European Standard EN 12004: 2007 and A1: June 2012. The major differences between the old version and this new revised draft standard are as follows: ; ƒ{ Deletes the reference to 'thin layer' in paragraph 3.1.1; ; ƒ{ Deletes from paragraph 6, dealing with classification and designation, category S0 for non-deformable adhesive and accordingly deletes from Table 1 the requirement for transverse deformation of non-deformable adhesive; ; ƒ{ Adds other types and designations allowed for tile adhesives ;

Products Covered: Adhesives for tiles (HS: 3506; ICS: 83.180 and 91.100.10).

Regulation Type: Regular notification

Distribution date: 03 May 2013 | Final date for Comment: 02 July 2013

Revision of the Mandatory Standard SI 388 dealing with carbon dioxide. This draft standard revision is based on the American Compressed Gas Association's Standard CGA G-6.2-2011 - Sixth edition - Commodity specification for carbon dioxide. The major differences between the old version and this new revised draft standard are as follow: ; ƒ{ Changes the classification method to that of the American document; ; ƒ{ Changes the requirements and test methods to those of the American document ;

Products Covered: Carbon dioxide (HS: 2811.21; ICS: 71.060.20).

Regulation Type: Regular notification

Distribution date: 03 May 2013 | Final date for Comment: 02 July 2013

Revision of the Mandatory Standard SI 388 dealing with carbon dioxide. This draft standard revision is based on the American Compressed Gas Association's Standard CGA G-6.2-2011 - Sixth edition - Commodity specification for carbon dioxide. The major differences between the old version and this new revised draft standard are as follow: ; ƒ{ Changes the classification method to that of the American document; ; ƒ{ Changes the requirements and test methods to those of the American document ;

Products Covered: Carbon dioxide (HS: 2811.21; ICS: 71.060.20).

Regulation Type: Regular notification

Distribution date: 03 May 2013 | Final date for Comment: 07 June 2013

The Minimum Requirements for Biological Products are to be partially amended to add the standards for 2 vaccines to be newly approved.

Products Covered: Drugs(HS: 30)

Regulation Type: Regular notification